Help CenterResetting the VELUX wall remote will clear it back to factory settings. This is usually done when other troubleshooting methods are not working.
If resetting the remote, all skylights or skylight shades attached to the remote will need to be reset as well. This process is not difficult, but it does require physically accessing the product.
Reset the remote.
First, press the end of a paperclip or similar tool into the gear icon hole on the bottom of the remote for 1 second. Follow this immediately by pressing the paperclip into the pairing icon hole next to the gear icon hole.
After the remote is reset, use the up/down arrows to test the remote. Confirm that the remote no longer operates your product. If the product still responds, perform the reset procedure again.
VIDEO: How to Reset a VELUX KLI 300 Series Remote
Reset and pair a skylight shade to your wall remote.
After confirming the shade is on, hold or slide the reset button for 10 seconds. The shade will buzz or begin to cycle.
Once the shade has reset, pair it to the remote. Press the pairing button on the remote for 1 second. Then, press the center stop button for 1 second. Within 3 seconds of pressing the stop button, press the down button for 1 second.
Repeat for each skylight shade that needs to be paired to the remote.
VIDEO: How to Pair and Copy VELUX KLI 310, 311, and 312 Remotes
Reset and pair a venting skylight to your basic remote.
First, locate the reset button (A hole) on the lower right interior frame of your skylight. Using the end of a paperclip or similar tool, press the reset button for 10 seconds. The skylight should begin to cycle.
Once the skylight has reset, pair it to the remote. Press the pairing button on your remote for 1 second. Then, press the center stop button for 1 second. Within 3 seconds of pressing the stop button, press the down button for 1 second.
Repeat for each skylight that needs to be paired to the remote.